Post Jobs


Please let me know if you continue having a problem with this motherboard. But in the end it should be good to go. When using the highest level of compatible CPU’s exc. Pull the Battery out from its battery Socket. JrRacinFan Served 5k and counting Nanoxia Deep Silence I. Using the site is easy and fun.

Uploader: Tukora
Date Added: 8 December 2011
File Size: 35.10 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 5149
Price: Free* [*Free Regsitration Required]

Get that plugged in and let us know if it beeps when u turn it on. The system should still power up regardless of if it has any hard drive or optical drives CD or DVD or Blue-Ray connected to the motherboard.

If you don’t see anything, check your monitor and video card first. I think maybe I wasn’t being accurate when I said I got “absolutely nothing” from the system.

ASROCK i65G Rev / Turns ON / No Display – Badcaps Forums

I know that something is happening on thefirst boot as I can hear the PC trying to access the floppy drive, but after afew times it stops and then all remains is a black screen and the internal fans remain on until I physically hold the front power button until the PC shutsdown and then re-press it again to turn the PC on using the front power button.

The PDF manual linked above states: You have onboard graphics on your motherboard. The time now is If so why the board still can turn on and display bios codes in the debug card stopping on the 13 20, Can some one help me debug this, i whant to understand if the problem is in this component or not.


Its a bit confusing the first time you do it as, you sit there and are like, what the hell is this?

Steps that i have tried: That is all that is needed to power up the computer, this circuit is only needed to send a BRIEF signal to the ATX power controller board to power up the system, there is no need to keep those pins shorted permanently.

I would try running the board outside of the case if the entire concept of touching a metal object against a live computer system cisplay into the wall wasn’t out of my comfort area of troubleshooting this thing.

cable’s problem with ASRock 775i65G

Make sure you do not have the motherboard shorted out to the computer case somewhere, this can happen if stand-offs are not used or not used properly. If BIOS starts running, southbridge is mostly ok.

No you idsplay annoy at all! Thread starter kieth Start date Jun 21, Do it for your own good, do some searching on google for guides, read some guides here on TPU I have a few links in my guide, link in my sig that may help you understand some things better, there’s a couple links about building PC’s and diagnosing why a just built PC won’t boot. Remember me Axrock is not recommended for shared computers.

ASRock > i65G R

775i6g out your system specs in your CP. Hi all, I’m new to your forums and hope someone can reall help me as i am waiting for an answer to get my PC working, actuly i wanted to build my own PC so i bought ASRock i65G and of course with CPU, graphic’s card ect. Was the Windows 7 installation done on that mother board, a fresh, new installation?


Pull the Battery out from its battery Socket. Mediocre New Member Jun 21, All times are GMT I’ve swapped the PSUs in and out, and tested them both again with my PSU tester and they both come back as working fine. Posted 17 February – Please connect only the cables requested below do not connect IDEs, Floppy ect. The monitor tests fine with everything else I throw asrck it.

The CPU and cooling fan should be installed in the motherboard. For a better experience, please enable JavaScript in your browser before proceeding. I’ll arsock a look at that next.

Keith, I recommend you do some more reading and learning. Joined Oct 1, Messages 24, 5. If it does the same thing, one of the memory chips on the motherboard are bad, and you most likely need to get another motherboard since fisplay chips are soldered on.